Smart Switch CISCO CBS250-8T-D-EU
Liên hệ báo giá8-port Gigabit Ethernet Smart Switch CISCO CBS250-8T-D-EU
– Support 8-port Gigabit Ethernet.
– Jumbo frames: Frame sizes up to 9K bytes. The default MTU is 2K bytes.
– MAC table: 8K addresses.
– LEDs: System, Link/Act, PoE, Speed.
– Flash: 256MB.
– CPU: 800 MHz ARM.
– DRAM: 512MB.
– Power: 100 to 240V 50 to 60 Hz, external.
– Unit dimensions (W x D x H): 160 x 128 x 30 mm.
– Unit weight: 0.54kg.
Thông số kỹ thuật và tính năng
Performance | |
Switching capacity and forwarding rate All switches are wire-speed and nonblocking |
– Capacity in millions of packets per second (64-byte packets): 11.90mpps – Switching capacity in gigabits per second: 16.0Gbps |
Layer 2 switching | |
Spanning Tree Protocol (STP) | Standard 802.1d spanning tree support Fast convergence using 802.1w (Rapid Spanning Tree Protocol [RSTP]), enabled by default Multiple spanning tree instances using 802.1s (MSTP); 8 instances are supported Per-VLAN Spanning Tree Plus (PVST+); 126 instances are supported Rapid PVST+ (RPVST+); 126 instances are supported |
Port grouping/link aggregation | Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) – Up to 4 groups – Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad Link Aggregation Group (LAG) |
VLAN | Support for up to 255 active VLANs simultaneously Port-based and 802.1Q tag-based VLANs Management VLAN Guest VLAN |
Voice VLAN | Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers networkwide zero-touch deployment of voice endpoints and call control devices |
Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) | Protocols for automatically propagating and configuring VLANs in a bridged domain |
IGMP (versions 1, 2, and 3) snooping | Internet Group Management Protocol (IGMP) limits bandwidth-intensive multicast traffic to only the requesters; supports 255 multicast groups (source-specific multicasting is also supported) |
IGMP querier | Used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router |
HOL blocking | Head-of-Line (HOL) blocking prevention |
Loopback detection | Provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP |
Layer 3 routing | |
IPv4 routing | Wire-speed routing of IPv4 packets Up to 32 static routes and up to 16 IP interfaces |
IPv6 routing | Wire-speed routing of IPv6 packets |
Layer 3 interface | Configuration of Layer 3 interface on physical port, LAG, VLAN interface, or loopback interface |
Classless Interdomain Routing (CIDR) | Support for CIDR |
Dynamic Host Configuration Protocol (DHCP) relay at Layer 3 | Relay of DHCP traffic across IP domains |
User Datagram Protocol (UDP) relay | Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BootP)/DHCP packets |
Security | |
Secure Sockets Layer (SSL) | SSL encrypts all HTTPS traffic, allowing secure access to the browser-based management GUI in the switch |
Secure Shell (SSH) Protocol | SSH is a secure replacement for Telnet traffic. Secure Copy (SCP) also uses SSH. SSH v1 and v2 are supported |
IEEE 802.1X (authenticator role) | Remote Authentication Dial-In User Service (RADIUS) authentication, guest VLAN, single/multiple host mode, and single/multiple sessions |
STP loopback guard | Provides additional protection against Layer 2 forwarding loops (STP loops) |
Secure Core Technology (SCT) | Ensures that the switch will receive and process management and protocol traffic no matter how much traffic is received |
Secure Sensitive Data (SSD) | A mechanism to manage sensitive data (such as passwords, keys, and so on) securely on the switch, populating this data to other devices, and secure autoconfig. Access to view the sensitive data as plain text or encrypted is provided according to the user-configured access level and the access method of the user |
Trustworthy systems | Trustworthy systems provide a highly secure foundation for Cisco products Run-time defenses (Executable Space Protection [X-Space], Address Space Layout Randomization [ASLR], Built-In Object Size Checking [BOSC]) |
Port security | Ability to lock source MAC addresses to ports and limit the number of learned MAC addresses |
RADIUS | Supports RADIUS authentication for management access. Switch functions as a client |
Storm control | Broadcast, multicast, and unknown unicast |
DoS prevention | Denial-of-Service (DoS) attack prevention |
Multiple user privilege levels in CLI | Level 1, 7, and 15 privilege levels |
Access Control Lists (ACLs) | Support for up to 512 rules Drop or rate limit based on source and destination MAC, VLAN ID or IPv4 or IPv6 address, IPv6 flow label, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag; ACL can be applied on both ingress and egress sides Time-based ACLs supported |
Quality of service | |
Priority levels | 8 hardware queues |
Scheduling | Strict priority and Weighted Round-Robin (WRR) queue assignment based on DSCP and class of service (802.1p/CoS) |
Class of service | Port based; 802.1p VLAN priority based; IPv4/v6 IP precedence/Type of Service (ToS)/DSCP based; Differentiated Services (DiffServ); classification and re-marking ACLs, trusted QoS |
Rate limiting | Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based |
Congestion avoidance | A TCP congestion avoidance algorithm is required to reduce and prevent global TCP loss synchronization |
IPv6 | |
IPv6 | IPv6 host mode IPv6 over Ethernet Dual IPv6/IPv4 stack IPv6 Neighbor Discovery (ND) IPv6 stateless address auto configuration Path Maximum Transmission Unit (MTU) discovery Duplicate Address Detection (DAD) Internet Control Message Protocol (ICMP) version 6 IPv6 over IPv4 network with Intrasite Automatic Tunnel Addressing Protocol (ISATAP) support USGv6 and IPv6 Gold Logo certified |
IPv6 QoS | Prioritize IPv6 packets in hardware |
IPv6 ACL | Drop or rate limit IPv6 packets in hardware |
Multicast Listener Discovery (MLD v1/2) snooping | Deliver IPv6 multicast packets only to the required receivers |
IPv6 applications | Web/SSL, Telnet server/SSH, Ping, Traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), Simple Network Management Protocol (SNMP), Remote Authentication Dial-In User Service (RADIUS), Syslog, DNS client, DHCP client, DHCP autoconfig |
IPv6 RFCs supported | RFC 4443 (which obsoletes RFC 2463): ICMPv6 RFC 4291 (which obsoletes RFC 3513): IPv6 address architecture RFC 4291: IPv6 Addressing Architecture RFC 2460: IPv6 Specification RFC 4861 (which obsoletes RFC 2461): Neighbor Discovery for IPv6 RFC 4862 (which obsoletes RFC 2462): IPv6 Stateless Address Autoconfiguration RFC 1981: Path MTU Discovery RFC 4007: IPv6 Scoped Address Architecture RFC 3484: Default address selection mechanism RFC 5214 (which obsoletes RFC 4214): ISATAP tunneling RFC 4293: Management Information Base (MIB) IPv6: Textual Conventions and General Group RFC 3595: Textual Conventions for IPv6 Flow Label |
Management | |
Cisco Business Dashboard | Support for embedded probe for Cisco Business Dashboard running on the switch. Eliminates the need to set up a separate hardware or virtual machine for the Cisco Business Dashboard Probe on site |
Cisco Business mobile app | Mobile app for Cisco Business Switch and Wireless products. Helps to set up a local network in minutes and provide easy management at your fingertips |
Cisco Network Plug and Play (PnP) agent | The Cisco Network Plug and Play solution provides a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or for provisioning updates to an existing network. The solution provides a unified approach to provision Cisco routers, switches, and wireless devices with a near-zero-touch deployment experience. Supports Cisco PnP Connect |
Web user interface | Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports configuration, wizards, system dashboard, system maintenance, and monitoring Basic and advanced mode for maximum operational efficiency |
SNMP | SNMP versions 1, 2c, and 3 with support for traps, and SNMP v3 User-based Security Model (USM) |
Remote monitoring (RMON) | Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis |
IPv4 and IPv6 dual stack | Coexistence of both protocol stacks to ease migration |
Firmware upgrade | Web browser upgrade (HTTP/HTTPS) and TFTP and upgrade over SCP running over SSH Dual images for resilient firmware upgrades |
Port mirroring | Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 4 source ports can be mirrored to one destination port |
VLAN mirroring | Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 4 source VLANs can be mirrored to one destination port |
Dynamic Host Configuration Protocol (DHCP) (options 12, 59, 60, 66, 67, 125, 129, and 150) | DHCP options facilitate tighter control from a central point (DHCP server), to obtain IP address, autoconfiguration (with configuration and image file download), DHCP Relay, and host name |
Secure Copy (SCP) | Securely transfers files to and from the switch |
Autoconfiguration with SCP file download | Enables mass deployment with protection of sensitive data |
Text-editable configs | Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment |
Smartports | Simplified configuration of QoS and security capabilities |
Auto Smartports | Automatically applies the intelligence delivered through the Smartports roles to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero-touch deployments |
Text view Command-Line Interface (CLI) | Scriptable CLI. A full CLI as well as a menu-based CLI is supported. User privilege levels 1, 7, and 15 are supported for the CLI |
Localization | Localization of GUI and documentation into multiple languages |
Login banner | Configurable multiple banners for web as well as CLI |
Other management | Traceroute; single IP management; HTTP/HTTPS; RADIUS; port mirroring; TFTP upgrade; DHCP client; Simple Network Time Protocol (SNTP); cable diagnostics; Ping; syslog; Telnet client (SSH secure support); automatic time settings from Management Station |
General | |
Jumbo frames | Frame sizes up to 9K bytes. The default MTU is 2K bytes |
MAC table | 8K addresses |
Discovery | |
Bonjour | The switch advertises itself using the Bonjour protocol |
Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-MED extensions | Link Layer Discovery Protocol (LLDP) allows the switch to advertise its identification, configuration, and capabilities to neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones |
Cisco Discovery Protocol | The switch advertises itself using the Cisco Discovery Protocol. It also learns the connected device and its characteristics using Cisco Discovery Protocol |
Hardware | |
Power consumption (worst case) | System power consumption: – 110V=7.6W – 220V=7.6W Power consumption (with PoE) Heat dissipation (BTU/hr): 25.93 |
Ports | Total system ports: 8 Gigabit Ethernet RJ-45 ports: 8 Gigabit Ethernet Combo ports (RJ-45 + SFP) |
USB slot | USB Type-A slot on the front panel of the switch for easy file and image management |
Buttons | Reset button |
Cabling type | Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T |
LEDs | System, Link/Act, PoE, Speed |
Flash | 256MB |
CPU | 800 MHz ARM |
DRAM | 512MB |
Packet buffer | 1.5 MB |
Environmental | |
Unit dimensions (W x D x H) | 160 x 128 x 30 mm |
Unit weight | 0.54kg |
Power | 100 to 240V 50 to 60 Hz, external |
Certification | UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A |
Operating temperature | 32° to 122°F (0° to 50°C) |
Storage temperature | -13° to 158°F (-25° to 70°C) |
Operating humidity | 10% to 90%, relative, noncondensing |
Storage humidity | 10% to 90%, relative, noncondensing |
Acoustic noise and Mean Time Between Failures (MTBF) | Fan (number): Fanless Acoustic noise: N/A MTBF at 25°C (hours): 3,277,956 |
– Bảo hành: 12 tháng.
Sản phẩm tương tự
-
Cisco Industrial Ethernet 4000 Series Switches
Cisco Industrial Ethernet 4000 Series là thiết bị chuyển mạch cung cấp khả năng truy cập bảo mật cao và các giao thức vòng hội tụ hàng đầu trong ngành để hỗ trợ các mạng linh hoạt và có thể mở rộng đồng thời tuân thủ các yêu cầu tuân thủ của ngành.
Đặc điểm nổi bật:
- 20-Gbps nonblocking switching capacity with up to 20 Gigabit Ethernet ports per switch
- High-density industrial PoE/PoE+ support providing in-line power to up to 8 power devices
- Line-rate, low-latency forwarding with advanced hardware assist features (such as NAT, IEEE1588)
- Simplified software upgrade path with universal images
*Xin vui lòng liên hệ với SMNET để biết thông tin chi tiết về các tùy chọn sản phẩm và cấu hình khác nhau cũng như nhận báo giá chính xác nhất.
-
CISCO ASA SECURITY APPLIANCES ASA5515-IPS-K9
122.590.000 ₫CISCO ASA SECURITY APPLIANCES ASA5515-IPS-K9 ASA 5515-X with IPS, SW, 6GE Data, 1GE Mgmt, AC, 3DES/AES. Cisco ASA 5500-X Next-Generation Firewall ASA5515-IPS-K9 is ASA5515-K9 with IPS service bundled, after this, ASA5515-IPS-K9 has a same datasheet with ASA5515-K9 include: 250 IPsec VPN Peers, 2 SSL VPN peers, firewall services, 6 copper Gigabit Ethernet data ports, 1 copper Gigabit Ethernet management port, 1 AC power supply, 3DES/AES encryption. Bảo hành: 12 […]
-
Security Router CISCO ASA5505-BUN-K9
8.490.000 ₫Security Router CISCO ASA5505-BUN-K9 Cisco ASA 5505 Adaptive Security Appliance ASA5505-BUN-K9 is easy-to-deploy solutions for small business, branch office, and enterprise teleworker environments by integrating world-class firewall, Unified Communications (voice/video) security, SSL and IPsec VPN, intrusion prevention (IPS), and content security services in a flexible, modular product family. Designed to protect your networks, ASA5505-BUN-K9 features a flexible 8-port 10/100 Fast Ethernet switch with two two Power over Ethernet (PoE) […]
-
Integrated Services Router CISCO CISCO3925E/K9
225.300.000 ₫Integrated Services Router CISCO CISCO3925E/K9 – Cisco 3925E w/SPE200, 4GE, 3EHWIC, 3DSP, 2SM, 256MBCF, 1GBDRAM,IPB. – Services Performance Engine module: w/SPE 200. – Rack Units: 3U. – Interfaces: 4 integrated 10/100/1000 Ethernet ports with 2 SFP ports. Expansion Slot(s): 2 service module slots; 3 onboard digital signal processor (DSP) slots; 3 Enhanced High-Speed WAN Interface Card (EHWIC) slots. – RAM: 1 GB (installed)/2 GB (max). – Flash Memory: 256 […]
-
8-port Cisco Gigabit Ethernet Enhanced High-Speed WAN Interface Cards EHWIC-D-8ESG
9.290.000 ₫8-port Cisco Gigabit Ethernet Enhanced High-Speed WAN Interface Cards EHWIC-D-8ESG 8-port Cisco Gigabit EtherSwitch 10/100/1000BASE-TX autosensing EHWIC. The 8-port Gigabit Ethernet EHWIC has eight 10/100/1000 switched Gigabit Ethernet ports, with a PoE support option on all 8 ports. The new features for the Gigabit Ethernet EHWICs include: 8 quality-of-service (QoS) queues per port, Shaped Deficit Weighted Round Robin (SDWRR), dynamic secure port, intrachassis cascading, up to 20W of PoE […]
-
CISCO ASA SECURITY APPLIANCES ASA5555-K9
358.956.000 ₫CISCO ASA SECURITY APPLIANCES ASA5555-K9 – ASA 5555-X with SW, 8GE Data, 1GE Mgmt, AC, 3DES/AES. – Cisco ASA 5500 Edition Bundle, ASA5555-K9 is the ASA 5555-X with SW, 8GE Data, 1GE Mgmt, AC, 3DES/AES. – Cisco ASA 5500 series adaptive security appliance fits your network and budget while offering the same proven level of security that protects some of the largest networks at some of the most security-conscious […]
-
Cisco Network Convergence System 5000 Series Routers
Bộ định tuyến tập hợp MPLS có hệ số dạng nhỏ, mật độ cao dành cho các mạng trung tâm dữ liệu hỗ trợ MPLS và tập hợp tàu điện ngầm. Hệ thống hội tụ mạng 5000 Series được thiết kế để mở rộng quy mô kinh tế cho các kiến trúc mạng trung tâm dữ liệu của nhà cung cấp dịch vụ, doanh nghiệp lớn (OTT) và nhà cung cấp dịch vụ.
Các dòng tùy chọn:
- NCS 5001
- NCS 5002
*Xin vui lòng liên hệ với SMNET để biết thông tin chi tiết về các tùy chọn sản phẩm và cấu hình khác nhau cũng như nhận báo giá chính xác nhất.
-
Cisco Nexus 3550 Series Switches
Cisco Nexus 3550 Series là thiết bị chuyển mạch hàng đầu với thiết kế có độ trễ thấp độc đáo có thể lập trình mạnh mẽ và cung cấp một môi trường phát triển phần sụn hoàn chỉnh cho các ứng dụng tùy chỉnh.
Đặc điểm nổi bật:
● SFP+ Fiber (10GBASE-SR, 10GBASE-LR, 10GBASE-LRM, 1000BASE-SX, 1000BASE-LX)
● SFP+ Copper Direct Attach
● RJ45 management port
● RJ45 industry-standard serial port (default speed: 115200 N81)
*Xin vui lòng liên hệ với SMNET để biết thông tin chi tiết về các tùy chọn sản phẩm và cấu hình khác nhau cũng như nhận báo giá chính xác nhất.
-
CISCO ASA SECURITY APPLIANCES ASA5545-K9
252.672.000 ₫CISCO ASA SECURITY APPLIANCES ASA5545-K9 – ASA5545-X with SW, 8GE Data, 1GE Mgmt, AC, 3DES/AES. – Cisco ASA5545-K9 delivers superior performance with up to 3 Gbps stateful inspection throughput, 2500 IPsec VPN peers, 750,000 concurrent connections and 1 expansion slot makes it ideally suited for the mid-size, large-size enterprises, internet edge deployments or even data center while delivering enterprise-strength security. Specification Stateful Inspection Throughput (Maximum) 3 Gbps Stateful Inspection […]