Access Point Aruba AP303 – JZ320A

• Low-cost 802.11ac Wave 2 (Wifi 5) enterprise connectivity.
• Up to 1.2Gbps aggregate peak data rate
• Daisy-chain another AP using the secondary PoE-out port
• Integrated Zigbee and Bluetooth 5 radio for IoT connectivity
• Resolve sticky client issues with MU-MIMO-aware ClientMatch.
• Participates in Aruba’s Dynamic Segmentation solution.
• Hardware Variants: Single Ethernet.
• Wifi Radio specifications:
•    + AP type: Indoor, dual radio, 5GHz 802.11ac 2×2 MIMO and 2.4GHz 802.11n 2×2 MIMO.
•    + 5GHz (radio 0):
•      + Two spatial stream Single User (SU) MIMO for up to 867Mbps wireless data rate to individual 2SS VHT80 client devices
•      + Two spatial stream Multi User (MU) MIMO for up to 867Mbps wireless data rate to two 1SS MU-MIMO capable client devices simultaneously
•    + 2.4GHz (radio 1):
•      + Two spatial stream Single User (SU) MIMO for up to 300Mbps wireless data rate to individual 2SS HT40 client devices.
•    + Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio.
•    + Supported frequency bands (country-specific restrictions apply):
•      + 2.400 to 2.4835 GHz.
•      + 5.150 to 5.250 GHz
•      + 5.250 to 5.350 GHz
•      + 5.470 to 5.725 GHz
•      + 5.725 to 5.850 GHz
• Wifi Antennas
•    + Two vertically polarized dual-band downtilt omni-directional antennas for 2×2 MIMO with peak antenna gain of 3.3dBi in 2.4GHz and 5.8dBi in 5GHz
•    + The antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.
• Combining the patterns of both antennas per radio, the peak gain of the average (effective) pattern is 2.1dBi in 2.4GHz and 5.7dBi in 5GHz.
• Other Interfaces
•    + E0: One 10/100/1000Base-T Ethernet netwwork interface (RJ-45)
•      + Auto-sensing link speed and MDI/MDX
•      + 802.3az Energy Efficient Ethernet (EEE)
•      + PoE-PD: 48VDC (nominal) 802.3af/at/bt PoE
•    + DC power interface
•    + E1: One 10/100/1000Base-T Ethernet network interface (RJ-45).
•      + Auto-sensing link speed and MDI/MDX.
•      + 802.3az Energy Efficient Ethernet (EEE)
•      + PoE-PSE (output): 48VDC (nominal) 802.3af/at PoE.
•    + Bluetooth Low Energy (BLE) radio.
•    + Zigbee 802.15.4 radio.
•    + Visual indicators (tri-color LEDs): for System and Radio status.
•    + Reset button: factor reset (during device power-up), LED mode control (normal/off).
•    + Serial console interface (propriately, µUSB physical jack)
•    + Kensington security slot.
• Power Sources and Consumption
•    + The AP supports direct DC power and Power over Ethernet (PoE).
•    + When both power sources are available, DC power takes priority over PoE.
•    + Power sources are sold separately
•    + Direct DC source: 12VDC nominal, +/-5%
•    + DC power interface accepts 2.1/5.5mm center-positive circular plug with 9.5mm length.
•    + Power over Ethernet (PoE): 48VDC (nominal) 802.3af compliant source.
•    + Maximum (worst-case) power consumption: 10.1W (PoE) or 8.8W (DC).
•    + Maximum (worst-case) power consumption in idle mode: 4.2W (PoE) or 4.0W (DC).
• Dimensions (WxDxH): 150 x 150 x 35 mm.
• Weight: 260g.