24-port SFP+/SFP with 4-port QSFP+ Switch JUNIPER EX4600-40F-AFI-T
Liên hệ báo giá24-port SFP+/SFP with 4-port QSFP+ Switch JUNIPER EX4600-40F-AFI-T
– 24 SFP+/SFP ports, 4 QSFP+ ports, 2 expansion slots, redundant fans, 2 AC power supplies, 2 power cords, 4-post rack mount kit, and back to front airflow
– TAA Compliant: Yes
Configuration
– Fixed 10GbE ports with 10G-USR optics, all ports forwarding (line rate), <10m
– 4 fixed 40GbE ports with 40G-SR4 optics
– 1 4x40GbE QIC card with 4 40G-SR4 optics
– 1 8x10GbE QIC card with 8 10G-USR optics, all ports forwarding (line rate), <10 m
– Dual power supplies
Hardware
– Switching capacity: 720 Gbps (unidirectional)/1.44 Tbps (bidirectional)
– Layer 2/Layer 3 throughput (maximum with 64 byte packets): 1,071 Mpps (wire speed)
– Weight: 9.84kg with PSUs and fans installed
– Dimensions (HxWxD): 4.37 x 44.09 x 52.02 cm
– Switching mode: Cut-through and store-and-forward
– Airflow: back to front
Performance Scale (Unidimensional)
– MAC addresses per system: 288,000
– VLAN IDs: 4,091
– Number of ports per LAG: 32
– Number of FCoE VLANs/FC virtual fabrics: 4,095
– Firewall filters: 4,000
– IPv4 unicast routes: 128,000 prefixes; 208,000 host routes
– IPv4 multicast routes: 104,000
– IPv6 multicast routes: 52,000
– IPv6 unicast routes: 64,000 prefixes
– Address Resolution Protocol (ARP) entries: 48,000
– Jumbo frame: 9,216 bytes
Layer 2 Features
– STP-IEEE 802.1D (802.1D-2004)
– Rapid Spanning Tree Protocol (RSTP) (IEEE 802.1w); MSTP (IEEE 802.1s)
– Bridge protocol data unit (BPDU) protect
– Loop protect
– Root protect
– RSTP and VSTP running concurrently
– VLAN-IEEE 802.1Q VLAN trunking
– Routed VLAN interface (RVI)
– Port-based VLAN
– MAC address filtering
– GRE tunneling
– QinQ
– VLAN translation
– Static MAC address assignment for interface
– Per VLAN MAC learning (limit)
– MAC learning deactivate
– Link Aggregation and Link Aggregation Control Protocol (LACP) (IEEE 802.3ad)
– IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
– MAC notification
– MAC address aging configuration
– MAC address filtering
– Persistent MAC (sticky MAC)
Layer 3 Features (IPv4)
– Static routing
– Routing policy
– Routing protocols (RIP, OSPF, IS-IS, BGP, MBGP)
– Virtual Router Redundancy Protocol (VRRP)
– Bidirectional Forwarding Detection (BFD) protocol
– Virtual router
– Dynamic Host Configuration Protocol (DHCP) relay
– Proxy Address Resolution Protocol (ARP)
– Multicast Features
– Internet Group Management Protocol (IGMP): v1, v2, v3
– IGMP snooping: v1, v2, v3
– IGMP filter
– PIM-SM
– Multicast Source Discovery Protocol (MSDP)
– Security and Filters
– Secure interface login and password
– RADIUS
– TACACS+
– Ingress and egress filters: Allow and deny, port filters, VLAN filters, and routed filters, including management port filters
– Filter actions: Logging, system logging, reject, mirror to an interface, counters, assign forwarding class, permit, drop, police, mark
– SSH v1, v2
– Static ARP support
– Storm control, port error deactivate, and autorecovery
– Control plane denial-of-service (DoS) protection
– Dynamic ARP inspection (DAI)
– DHCP snooping
– Filter based forwarding
– IP directed broadcast traffic forwarding
– IPv4 over GRE (encap and decap)
Layer 3 Features (IPv6)
– Static routing
– Routing protocols (RIPng, OSPF v3, IS-IS v6, BGP v6)
– Virtual Router Redundancy Protocol (VRRP v3)
– IPv6 CoS (BA, MF classification and rewrite, scheduling based on TC)
– IPv6 over MPLS LSPs (6PE)
– IPv6 ping
– IPv6 traceroute
– Neighbor discovery protocol
– Path MTU discovery
– SNMP, NTP, DNS, RADIUS, TACACS+, AAA
– Virtual router support for IPv6 unicast
– Bảo hành: 12 tháng.
Sản phẩm tương tự
-
24-port SFP+/SFP with 4-port QSFP+ Switch JUNIPER EX4600-40F-DC-AFO
24-port SFP+/SFP with 4-port QSFP+ Switch JUNIPER EX4600-40F-DC-AFO – 24 SFP+/SFP ports, 4 QSFP+ ports, 2 expansion slots, redundant fans, 2 DC power supplies, front to back airflow Configuration – Fixed 10GbE ports with 10G-USR optics, all ports forwarding (line rate), <10m – 4 fixed 40GbE ports with 40G-SR4 optics – 1 4x40GbE QIC card with 4 40G-SR4 optics – 1 8x10GbE QIC card with 8 10G-USR optics, all […]
-
24-port SFP+/SFP with 4-port QSFP+ Switch JUNIPER EX4600-40F-DC-AFI
24-port SFP+/SFP with 4-port QSFP+ Switch JUNIPER EX4600-40F-DC-AFI – 24 SFP+/SFP ports, 4 QSFP+ ports, 2 expansion slots, redundant fans, 2 DC power supplies, back to front airflow Configuration – Fixed 10GbE ports with 10G-USR optics, all ports forwarding (line rate), <10m – 4 fixed 40GbE ports with 40G-SR4 optics – 1 4x40GbE QIC card with 4 40G-SR4 optics – 1 8x10GbE QIC card with 8 10G-USR optics, all […]
-
48-port 10/100/1000BaseT with 4 SFP+ and 2 QSFP+ Switch JUNIPER EX3400-48T-AFI
48-port 10/100/1000BaseT with 4 SFP+ and 2 QSFP+ Switch JUNIPER EX3400-48T-AFI – 48-port 10/100/1000BaseT PoE+, 4 x 1/10G SFP/SFP+, 2 x 40G QSFP+, redundant fans, front-to-back airflow, 1 AC PSU JPSU-920-AC-AFO included (optics sold separately) Hardware – Switching Engine Model: Store and forward – DRAM: 2 GB with ECC – Flash: 2 GB – CPU: Dual Core 1 GHz – Dimensions: 44.2 x 4.4 x 35 cm – Rack […]
-
24-Port 10/100/1000 Ethernet with 4-port SFP/SFP+ Switch JUNIPER EX2300-24T
24-Port 10/100/1000 Ethernet with 4-port SFP/SFP+ Switch JUNIPER EX2300-24T – Support 24-port 10/100/1000 BaseT, 4 x 1/10G SFP/SFP+ (optics sold separately). – Backplane: 80 Gbps Virtual Chassis interconnect to link up to four switches as a single logical device. – DRAM: 2 GB. – Flash: 2 GB. – CPU: 1.25GHz ARM CPU. – GbE Port Density per System: 28 (24 host ports + four-port SFP/SFP+ uplinks). – Supported Optics: […]
-
24-port 10/100/1000BaseT with 4 SFP+ and 2 QSFP+ Switch JUNIPER EX3400-24T-DC
24-port 10/100/1000BaseT with 4 SFP+ and 2 QSFP+ Switch JUNIPER EX3400-24T-DC – Juniper EX3400-24T-DC giải pháp kiểm soát và quản lý mạng hoàn hảo không thể thiếu trong các doanh nghiệp hiện nay. Với việc kế thừa bộ tính năng hoàn hảo của phân khúc Switch EX3400 Series, bộ chuyển mạch Juniper EX3400-24T-DC cũng được đồng bộ hóa với hệ điều hành Junos giúp linh hoạt trong viêc quản […]
-
24-Port 10/100/1000 Ethernet PoE+ with 4-port SFP/SFP+ Switch JUNIPER EX2300-24P
24-Port 10/100/1000 Ethernet PoE+ with 4-port SFP/SFP+ Switch JUNIPER EX2300-24P – Support 24-port 10/100/1000 BaseT PoE+, 4 x 1/10G SFP/SFP+ (optics sold separately). – Backplane: 80 Gbps Virtual Chassis interconnect to link up to four switches as a single logical device. – DRAM: 2 GB. – Flash: 2 GB. – CPU: 1.25GHz ARM CPU. – GbE Port Density per System: 28 (24 host ports + four-port SFP/SFP+ uplinks). – […]
-
48-port 10/100/1000BaseT with 4 SFP+ and 2 QSFP+ Switch JUNIPER EX3400-48P-TAA
48-port 10/100/1000BaseT with 4 SFP+ and 2 QSFP+ Switch JUNIPER EX3400-48P-TAA – EX3400 TAA 48-port 10/100/1000BaseT PoE+, 4 x 1/10G SFP/SFP+, 2 x 40G QSFP+, redundant fans, front-to-back airflow, 1 AC PSU JPSU-920-AC-AFO included (optics sold separately) Hardware – Switching Engine Model: Store and forward – DRAM: 2 GB with ECC – Flash: 2 GB – CPU: Dual Core 1 GHz – Dimensions: 44.1 x 4.37 x 35 cm […]
-
48-Port 10/100/1000 Ethernet with 4-port SFP/SFP+ Switch JUNIPER EX2300-48T
48-Port 10/100/1000 Ethernet with 4-port SFP/SFP+ Switch JUNIPER EX2300-48T – Support 48-port 10/100/1000BaseT, 4 x 1/10G SFP/SFP+ (optics sold separately). – Backplane: 80 Gbps Virtual Chassis interconnect to link up to four switches as a single logical device. – DRAM: 2 GB. – Flash: 2 GB. – CPU: 1.25GHz ARM CPU. – GbE Port Density per System: 52 (48 host ports + four-port SFP/SFP + uplinks). – Supported Optics: […]
-
12-port 10/100/1000Base-T with 2-port SFP/SFP+ Switch JUNIPER EX2300-C-12T-TAA
12-port 10/100/1000Base-T with 2-port SFP/SFP+ Switch JUNIPER EX2300-C-12T-TAA – Compact Fanless 12-port 10/100/1000Base-T, 2 x 1/10GbE SFP/SFP+ (optics sold separately) – Layer 2/Layer 3 Throughput (Mpps) (Maximum with 64 Byte Packets): 47 Mpps (wire speed) – Dimensions: 27.9 x 4.4 x 23.9 cm – Weight: 2.48 kg – TAA Compliant Layer 2 Features – Maximum MAC addresses in hardware: 16,000 – Jumbo frames: 9216 bytes – Number of VLANs supported: […]