Bỏ qua đến nội dung
0
Giỏ hàng 0 sản phẩm

Chưa có sản phẩm trong giỏ hàng.

Tư vấn giải pháp

Cisco Catalyst IW9165 Rugged Series

Liên hệ Hóa đơn VAT Bảo hành chính hãng

Dòng Catalyst IW9165 giải quyết nhu cầu ngày càng tăng về kết nối không dây của máy khách đáng tin cậy với các ứng dụng quan trọng khi các tổ chức tự động hóa các quy trình và hoạt động.

Các dòng tùy chọn

THÔNG TIN SẢN PHẨM

Chi tiết và thông số kỹ thuật

IW9165E-x-WGB

  • ​​Workgroup bridge (WGB) software​
  • ​​​​Dual 802.11ax radios (5GHz, 5/6GHz)
  • ​​Two RJ45 ports (2.5, 1Gbps), optional M12 adapter​
  • Temperature ranges of -20° to 50°C

IW9165E-x-URWB

  • ​​Cisco Ultra‑Reliable Wireless Backhaul (URWB) software​
  • ​​​​Dual 802.11ax radios (5GHz, 5/6GHz)
  • ​​​Two RJ45 ports (2.5, 1Gbps), optional M12 adapter​​
  • Temperature ranges of -20° to 50°C

Wireless Cisco Catalyst IW9165 Rugged Series tại SMNET có gì nổi bật 

Vận hành doanh nghiệp vô cùng phức tạp; do vậy, giảm thiểu nỗ lực từ bất kỳ khía cạnh nào là một điều nên làm, đặc biệt nếu nó liên quan tới công nghệ thông tin. Đó cũng chính là điều Cisco hướng tới khi giới thiệu sản phẩm Cisco Catalyst IW9165 Rugged Series, gắn cho sản phẩm này sứ mệnh “Ít nỗ lực cho công nghệ thông tin để tập trung xây dựng bộ máy kinh doanh”.

Catalyst IW9165E được thiết kế để bổ sung kết nối không dây cực kỳ đáng tin cậy cho các phương tiện và máy móc đang di chuyển. Yếu tố hình thức nhỏ gọn của nó làm cho nó rất đơn giản để tích hợp vào các tài sản công nghiệp. Nó có thể hoạt động ở chế độ WGB hoặc Cisco URWB để kích hoạt mọi trường hợp sử dụng và tận dụng môi trường không dây hiện có.

Những tính năng và lợi ích chính của sản phẩm

Nhỏ gọn và dễ cài đặt
Yếu tố hình thức nhỏ gọn của nó cho phép tích hợp trơn tru trong các phương tiện công nghiệp, rô-bốt, cần cẩu, xe lửa, v.v.

Tìm chức năng và tính linh hoạt​
Tận hưởng thông lượng cao và vùng phủ sóng vô tuyến lý tưởng với radio 802.11ax kép và nhiều lựa chọn ăng-ten.

Nhận được nhiều hơn từ tài sản công nghiệp của bạn
Tăng cường khả năng với Bluetooth và kết nối đầu vào/đầu ra đa năng (GPIO), cũng như định vị hệ thống vệ tinh định vị toàn cầu (GNSS) của các tài sản di chuyển.

Giữ kết nối của bạn đáng tin cậy và an toàn​
Sử dụng mạng Wi-Fi 6/6E của bạn làm cầu nối nhóm làm việc (WGB) hoặc có được độ trễ cực thấp và không bị mất gói trong chế độ Đường truyền không dây siêu đáng tin cậy của Cisco.

Tags: Thiết bị mạng – Tường lửaThiết bị mạng – tường lửa CiscoCisco Wireless

Item

Specification

Part numbers

Cisco Catalyst IW9165 Series access points

●  IW9165E-x-WGB: Catalyst IW9165E with Wi-Fi software
●  IW9165E-x-URWB: Catalyst IW9165E with Cisco URWB software

Regulatory domains: (x = regulatory domain)

Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.

Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists.

Software

IW9165E-WGB

●  Cisco IOS ®XE Software Release 21.1.1 or later

IW9165E-CURWB

●  Cisco Unified Client Software 17.12.1 or later

Antennas

Catalyst IW9165E (external antenna)

●  4x RP-SMA antenna ports
●  Certified for use with antenna gains up to 15 dBi (5 GHz)
●  Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
●  Supports self-identifiable antennas (SIA)

Interfaces

IW9165E

●  1x 100M/1000M/2.5G Multigigabit Ethernet (RJ45)/M12 X-code autosensing PoE+ in (802.3af/at), Cisco UPOE ® in
●  1x 100M/1000M/1G (RJ45)
●  1x SMA GNSS antenna port
●  2x GPIO ports
●  Management console port (RJ45)
●  Multicolor system LED
●  Received signal strength indicator (RSSI) LED
●  Port LED
●  DC power input (micro-fit)
●  Reset button

Dimensions
(W x L x H)

IW9165E

●  6.0 x 4.9 x 1.7 in (15.2 x 12.4 x 4.3 cm)

Weight

IW9165E

●  1.7 lb. (0.75 kg)

Mouting Options

IW9165E

●  Wall/panel
●  DIN Rail (vertical, horizontal and bottom)

Input power requirements

●  802.3af (PoE), 802.3at (PoE+)
●  DC power source: 24 to 48 VDC (maximum voltage range: 16.8 to 60 VDC)
●  Cisco power AC-DC power adapter, IW-PWRADPT-MFIT4PN=
●  Cisco power injector, IW-PWRINJ-60RGDMG=

Power draw

Power input type

5 GHz radio

5/6 GHz radio

RJ45 Multigigabit

RJ45 1G

Power budget

24-48 VDC

2×2

2×2

2.5 Gbps

Yes

20W

802.3at (PoE+)

2×2

2×2

2.5 Gbps

Yes

20W

802.3af (PoE)

1×1

1×1

1 Gbps

No

12.95W

Note: Power required at the power source equipment (PSE) will depend on the cable length and other environmental issues.

Surge

●  Surge protection to ± 2 kV (line-earth) and ± 1 kW (line-line) on DC power input
●  Surge protection to ± 4 kV on Ethernet ports

Environmental

IW9165E

●  Nonoperating (storage) temperature: -22° to +158°F (-30° to +70°C)
●  Nonoperating (storage) altitude test: +25°C (77°F), 15,000 ft.
●  Operating temperature: -4° to +122°F (-20° to +50°C) with still air
●  Operating humidity: 5% to 95% (noncondensing)
●  Operating altitude: 15,000 ft. (4,500 m)

Environmental ratings

IW9165E

●  IP30

System memory

●  2048 MB DRAM
●  1024 MB flash

Data rates supported

5 GHz radio:

●  802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
●  802.11n: HT20 and HT40, MCS0 to 15
●  802.11ac:

◦    VHT20 MCS0 to 8, 1 or 2 spatial streams

◦    VHT40 and VHT80 MCS0 to 9, 1 or 2 spatial streams

●  802.11ax:

◦    HE20, HT40, and HE80 MCS0 to 11, 1 or 2 spatial streams

5/6 GHz radio:

●  802.11a (5 GHz band only): 6, 9, 12, 18, 24, 36, 48, 54 Mbps
●  802.11n (5 GHz band only): HT20 and HT40, MCS0 to 15
●  802.11ac (5 GHz band only):

◦    VHT20 MCS0 to 8, 1 or 2 spatial streams

◦    VHT80, VHT160 MCS0 to 9, 1 or 2 spatial streams

●  802.11ax:

◦    HE20, HT40, HE80, and HE160 MCS0 to 11, 1 or 2 spatial streams

Frequency band and 20-MHz operating channels

A (A regulatory domain):

●  5.260 to 5.320 GHz; 4 channels
●  5.500 to 5.700 GHz; 8 channels (excludes 5.600 to 5.640 GHz)
●  5.745 to 5.825 GHz; 5 channels

B (B regulatory domain):

●  5.180 to 5.320 GHz; 8 channels
●  5.500 to 5.720 GHz; 12 channels
●  5.745 to 5.825 GHz; 5 channels

E (E regulatory domain, outdoor):

●  5.500 to 5.700 GHz; 11 channels

E (E regulatory domain, indoor, IW9165E only):

●  5.180 to 5.320 GHz; 8 channels
●  5.500 to 5.700 GHz; 11 channels

Q (Q regulatory domain):

●  5.500 to 5.720 GHz; 12 channels

Z (Z regulatory domain):

●  5.500 to 5.700 GHz; 8 channels (excludes 5.600 to 5.640 GHz)
●  5.745 to 5.825 GHz; 5 channels

Note: This varies by regulatory domain. Customers are responsible for verifying approval for use in their individual countries. To verify approval and to determine availability of the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/c/dam/assets/prod/wireless/wireless-compliance-tool/index.html

Maximum number of nonoverlapping channels

5 GHz

●  802.11a:

◦    20 MHz: 25

●  802.11n:

◦    20 MHz: 25

◦    40 MHz: 12

●  802.11ac/ax:

◦    20 MHz: 25

◦    40 MHz: 12

◦    80 MHz: 6

◦    160 MHz: 2

6 GHz*

●  802.11ax:

◦    20 MHz: 41

◦    40 MHz: 20

◦    80 MHz: 9

◦    160 MHz: 4

Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain.

Available transmit power settings (max/min), all antennas active

5 GHz

●  23 dBm (200 mW)
●  -7 dBm (0.2 mW)

5/6 GHz

●  20 dBm (100 mW)
●  -7 dBm (0.2 mW)