Bỏ qua đến nội dung
0
Giỏ hàng 0 sản phẩm

Chưa có sản phẩm trong giỏ hàng.

Tư vấn giải pháp

Cisco Network Convergence System 5700 Series Router Line Cards

Liên hệ Hóa đơn VAT Bảo hành chính hãng

Cisco Network Convergence System 5700 Series Router Line Cards mang lại khả năng mở rộng và tính linh hoạt cho mạng của nhà cung cấp. Định tuyến phân đoạn tích hợp hỗ trợ các dịch vụ dựa trên hiệu suất và các cổng 400G mật độ cao mang lại sự phát triển mạng lâu dài.

Các dòng tùy chọn

  • NC57-18DD-SE
  • NC57-24DD
  • NC57-36H-SE
  • NC57-36H6D-S

*Xin vui lòng liên hệ với SMNET để biết thông tin chi tiết về các tùy chọn sản phẩm và cấu hình khác nhau cũng như nhận báo giá chính xác nhất.

THÔNG TIN SẢN PHẨM

Chi tiết và thông số kỹ thuật

Router Cisco Network Convergence System 5700 Series Router Line Cards tại SMNET có gì nổi bật 

Vận hành doanh nghiệp vô cùng phức tạp; do vậy, giảm thiểu nỗ lực từ bất kỳ khía cạnh nào là một điều nên làm, đặc biệt nếu nó liên quan tới công nghệ thông tin. Đó cũng chính là điều Cisco hướng tới khi giới thiệu sản phẩm Cisco Network Convergence System 5700 Series Router Line Cards gắn cho sản phẩm này sứ mệnh “Ít nỗ lực cho công nghệ thông tin để tập trung xây dựng bộ máy kinh doanh.

Những tính năng và lợi ích của sản phẩm

Sẵn sàng cho tương lai
Mở rộng quy mô theo nhu cầu với cấu hình cổng linh hoạt từ 10G đến 400G và có sẵn 3,6, 4,8, 7,2 hoặc 9,6 Tbps trên mỗi thẻ dòng khe cắm.

Dịch vụ nhanh nhẹn
Hội tụ tất cả các dịch vụ vào một cơ sở hạ tầng duy nhất và sử dụng Định tuyến theo phân đoạn để kiểm soát lưu lượng chi tiết từ đầu đến cuối nhằm mang lại trải nghiệm tốt nhất cho khách hàng.

Bảo vệ đầu tư
Với khả năng tương thích ngược, mô hình trả tiền khi bạn phát triển linh hoạt và hệ điều hành iOS XR trên toàn mạng, nền tảng này mang lại sự tăng trưởng dài hạn mở rộng theo nhu cầu và bảo vệ đầu tư.

Sự bền vững
Hiệu quả sử dụng năng lượng và khả năng mở rộng với hệ điều hành mạng cấp nhà cung cấp dịch vụ để định cỡ phù hợp cho dấu chân mạng và giảm tác động carbon của bạn.

Tags: Thiết bị mạng – Tường lửaThiết bị mạng – tường lửa CiscoCisco Router

Feature

Specification

Product ID (PID)

NC57-24DD

NC57-18DD-SE

NC57-36H6D-S

NC57-36H-SE

NC57-MOD-S

Specifications

●  24 ports 400 Gigabit Ethernet
●  2 forwarding ASICs
●  FIB scale up to 2.5M IPv4 or up to 1M IPv6 routes
●  On-chip Ternary Content-Addressable Memory (TCAM) for network Access Control Lists (ACL) and Quality of Service (QoS)
●  Supports SyncE and IEEE1588 PTP in combination with route processor NC55-RP-E
●  18 ports 400 Gigabit Ethernet or 30 ports 200/100 Gigabit Ethernet
●  2 forwarding ASICs
●  External TCAM provides FIB scale up to 5M IPv4 or up to 3M IPv6 routes (unidimensional figures that are to increase with future Cisco IOS XR releases)
●  On-chip Ternary Content-Addressable Memory (TCAM) for network ACLs and QoS
●  Supports SyncE and IEEE1588 PTP in combination with route processor NC55-RP-E
●  Flexible port configuration
◦  36 ports 100 Gigabit Ethernet
◦  24 port 100 Gigabit Ethernet + 12 port 200 Gigabit Ethernet
◦  24 port 100 Gigabit Ethernet + 6 port 400 Gigabit Ethernet
●  1 forwarding ASIC
●  FIB scale up to 2.5M IPv4 or to 1M IPv6 routes
●  On-chip Ternary Content-Addressable Memory (TCAM) for network ACLs and QoS
●  Supports SyncE and IEEE1588 PTP (Class B) in combination with route processor NC55-RP-E
●  Supports Class C timing in combination with route processor NC55-RP2-E
●  Macsec support on all ports
●  36 ports 100 Gigabit Ethernet
●  1 forwarding ASIC
●  External TCAM provides FIB scale up to 5M IPv4 or up to 3M IPv6 routes (unidimensional figures that are to increase with future Cisco IOS XR releases)
●  On-chip Ternary Content-Addressable Memory (TCAM) for network Access Control Lists (ACL) and Quality of Service (QoS)
●  Supports SyncE and IEEE1588 PTP (Class B) in combination with route processor NC55-RP-E
●  Flexible port configuration
◦  2 ports 400 Gigabit Ethernet
◦  8 ports 50 Gigabit Ethernet
◦  2 ports 800G MPA
●  1 forwarding ASIC
●  FIB scale up to 2.5M IPv4 or to 1M IPv6 routes
●  On-chip Ternary Content-Addressable Memory (TCAM) for network ACLs and QoS
●  Supports SyncE and IEEE1588 PTP (Class B) in combination with route processor NC55-RP-E
●  Supports Class C timing in combination with route processor NC55-RP2-E
●  Macsec support on all ports

Power consumption

Line card with no transceivers:

●  Typical (27°C): 880W
●  Maximum (40°C): 890W

Line card with no transceivers:

●  Typical (27°C): 800W
●  Maximum (40°C): 900W

Line card with no transceivers:

●  Typical (27°C): 676W
●  Maximum (40°C): 873W

Line card with no transceivers:

●  Typical (27°C): 550W
●  Maximum (40°C): 668W

Line card with no transceivers:

●  Typical (27°C): 270W

Maximum (40°C): 440W

Physical specifications

Height: 1.69 in (4.27 cm)

Width: 16.89 in (42.9 cm)

Depth: 17.89 in (43.32 cm)

Weight: 18.25 lbs (8.27 kg) without optics

Height: 1.69 in (4.27 cm)

Width: 16.89 in (42.9 cm)

Depth: 17.89 in (43.32 cm)

Weight: 18.9 lbs (8.57 kg) without optics

Height: 1.69 in (4.27 cm)

Width: 16.89 in (42.9 cm)

Depth: 17.89 in (43.32 cm)

Weight: 17.22 lbs (7.81 kg) without optics

Height: 1.69 in (4.27 cm)

Width: 16.89 in (42.9 cm)

Depth: 17.89 in (43.32 cm)

Weight: 15.18 lbs (6.88 kg) without optics

Height: 1.69 in (4.27 cm)

Width: 16.89 in (42.9 cm)

Depth: 17.89 in (43.32 cm)

Weight: 15.0 lbs (6.81 kg) without MPAs and optics