THÔNG TIN SẢN PHẨM
Chi tiết và thông số kỹ thuật
Wireless Access Point CISCO CW9166I-ROW
– Software: Cisco IOS ® XE Software Release 17.9.1 or later.
– Supported wireless LAN controllers:
+ Cisco Catalyst 9800 Series Wireless Controllers (physical or virtual);
+ Cisco Catalyst 9000 switches with Embedded Wireless Controller in SDA mode.
– Interfaces: 1x 100M/1000M/2.5G/5G Multigigabit Ethernet (RJ-45); Management console port (RJ-45); USB 2.0 at 4.5W.
– Dimensions (W x L x H): 241.3 x 241.3 x 56.9 mm.
– Weight: 1.60kg.
Specifications
| Software | Cisco IOS ® XE Software Release 17.9.1 or later |
| Supported wireless LAN controllers | – Cisco Catalyst 9800 Series Wireless Controllers (physical or virtual) – Cisco Catalyst 9000 switches with Embedded Wireless Controller in SDA mode |
| 802.11n version 2.0 (and related) capabilities | – 4×4 MIMO with four spatial streams – Maximal Ratio Combining (MRC) – 802.11n and 802.11a/g – 20- and 40-MHz channels – PHY data rates up to 1.5 Gbps (40 MHz with 5GHz and 20 MHz with 2.4GHz) – Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) – 802.11 Dynamic Frequency Selection (DFS) – Cyclic Shift Diversity (CSD) support |
| 802.11ac | – 4×4 downlink MU-MIMO with four spatial streams – MRC – 802.11ac beamforming – 20-, 40-, 80-, and 160-MHz channels – PHY data rates up to 3.4 Gbps (Dual 4×4 80+80 MHz on 5GHz) – Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) – 802.11 DFS – CSD support – Wi-Fi Protected Access (WPA) 3 support |
| 802.11ax | – 1024 QAM – 4×4 uplink/downlink MU-MIMO with four spatial streams (2.4GHz, 5GHz and 6GHz) – Uplink/downlink OFDMA – TWT – BSS coloring – MRC – 802.11ax beamforming – 20-, 40-, 80-, and 160-MHz channels (6GHz) – 20-, 40-, 80-, and 80+80-MHz channels (5GHz) – 20-MHz channels (2.4GHz) – PHY data rates up to 7.78 Gbps (4×4 160 MHz on 6GHz, 4×4 80 MHz on 5GHz, and 4×4 20 MHz on 2.4GHz) – Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) – 802.11 DFS – CSD support – WPA3 support |
| Antennas | – 2.4GHz: Peak gain 3 dBi, internal antenna, omnidirectional in azimuth – 5GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth – 5GHz (XOR): Peak gain 5 dBi, internal antenna, omnidirectional in azimuth – 6GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth |
| Interfaces | – 1x 100M/1000M/2.5G/5G Multigigabit Ethernet (RJ-45) – Management console port (RJ-45) – USB 2.0 at 4.5W |
| Indicators | – Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
| Dimensions (W x L x H) | – Access point (without mounting brackets): 9.5 x 9.5 x 2.2 in. (241.3 x 241.3 x 56.9 mm) |
| Weight | 1.60 kg |
| Input power requirements | – 802.3bt, Cisco Universal PoE (Cisco UPOE), 802.3at Power over Ethernet Plus (PoE+) – Cisco power injectors: AIR-PWRINJ7=, AIR-PWRINJ6=, MA-INJ-6 – 802.3af PoE (only for configuration staging, all radios off) – DC power input (54V/MA-PWR-50WAC) |
| Environmental | – Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) – Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4600 m) – Operating temperature: 32° to 122°F (0° to 50°C) – Operating humidity: 10% to 90% (noncondensing) – Operating altitude test: 40°C (104°F) at 9843 ft (3000 m) |
| System memory | – 2048 MB DRAM – 1024 MB flash |
– Bảo hành: 12 tháng.
