HP 2530-8G Switch J9777A
7.800.000 ₫
HP 2530-8G Switch J9777A
– Fixed Port Layer-2 Managed Ethernet Switch.
– 8 RJ-45 autosensing 10/100/1000 ports, 2 dual-personality ports; RJ-45 10/100/1000 or SFP slot
Features
Quality of Service (QoS)
– Traffic prioritization (IEEE 802.1p): allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP)
– Simplified QoS configuration: Port-based: prioritizes traffic by specifying a port and priority level. VLAN-based: prioritizes traffic by specifying a VLAN and priority level.
– Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
– Rate limiting: sets per-port ingress enforced maximums for all ingressed traffic or for broadcast, multicast, or unknown destination traffic
– Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers
Management
– Choice of management interfaces: Web graphical user interface (GUI): HTML-based easy-to-use graphical interface allows configuration of the switch from any Web browser. Command-line interface (CLI): provides advanced configuration and diagnostics through a robust CLI. Simple Network Management Protocol (SNMPv1/v2c/v3): allows a switch to be managed with a variety of third-party network management applications.
– Virtual stacking: provides single IP address management for up to 16 switches
– sFlow (RFC 3176): delivers wire-speed traffic accounting and monitoring configured by SNMP and CLI with three terminal encrypted receivers
– IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automates device discovery protocol for easy mapping by network management applications
– Logging: provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce the number of log events generated
Connectivity
– IPv6: IPv6 host: allows the switch to be deployed and managed at the edge of an IPv6 network. Dual stack (IPv4/IPv6): supports connectivity for both protocols; provides a transition mechanism from IPv4 to IPv6. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network.
– IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras
– IEEE 802.3at Power over Ethernet Plus: provides up to 30 W per port to IEEE 802.3 for PoE/PoE+-powered devices such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/tilt/zoom security cameras (see product specifications for total PoE power available)
– Auto-MDIX: adjusts automatically for straight-through or crossover cables on all ports
– Pre-standard PoE support: detects and provides power to pre-standard PoE devices
Layer 2 switching
– VLANs: provides support for 512 VLANs and 4,094 VLAN IDs
– Jumbo packet support: supports up to 9220-byte frame size to improve the performance of large data transfers; 8- and 24-port Fast Ethernet models automatically support up to 2000-byte frames with no configuration needed
– 16K MAC address table: provides access to many Layer 2 devices
– GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs
– Per-VLAN Spanning Tree Plus (PVST+): allows each VLAN to build a separate spanning tree to improve link bandwidth usage in network environments with multiple VLANs
Specifications
|
I/O ports and slots |
8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; |
|
|
1000BASE-T: full only |
||
|
2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) ports |
||
|
1 dual-personality (RJ-45 or USB micro-B) serial console port |
||
|
Physical characteristics |
Dimensions |
10(w) x 6.28(d) x 1.75(h) in (25.4 x 15.95 x 4.45 cm) (1U height) |
|
Weight |
2.0 lb (0.91 kg) |
|
|
Memory and processor |
Processor |
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 1.5 MB dynamically allocated |
|
Mounting |
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall mounting |
|
|
Performance |
IPv6 Ready Certified |
|
|
100 Mb Latency |
< 7.4 µs (LIFO 64-byte packets) |
|
|
1000 Mb Latency |
< 2.6 µs (LIFO 64-byte packets) |
|
|
Throughput |
up to 14.8 million pps (64-byte packets) |
|
|
Switching capacity |
20 Gbps |
|
|
MAC address table size |
16000 entries |
|
|
Environment |
Operating temperature |
32°F to 113°F (0°C to 45°C) |
|
Operating relative humidity |
15% to 95% @ 104°F (40°C), noncondensing |
|
|
Non-operating/ |
-40°F to 158°F (-40°C to 70°C) |
|
|
Storage temperature |
||
|
Non-operating/Storage relative humidity |
15% to 90% @ 149°F (65°C), noncondensing |
|
|
Altitude |
up to 10,000 ft (3 km) |
|
|
Acoustic |
Power: 0 dB, Pressure: 0 dB |
|
|
Electrical characteristics |
Frequency |
50/60 Hz |
|
Maximum heat dissipation |
63 BTU/hr (66.46 kJ/hr), (switch only: 63 BTU/hr) |
|
|
AC voltage |
100-127/200-240 VAC |
|
|
Current |
0.5 A |
|
|
Maximum power rating |
18.6 W |
|
|
Idle power |
13.6 W |
|
|
Safety |
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1 |
|
|
Emissions |
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A |
|
|
Immunity |
Generic |
EN 55024, CISPR 24 |
|
EN |
EN 55024, CISPR 24 |
|
|
ESD |
IEC 61000-4-2 |
|
|
Radiated |
IEC 61000-4-3 |
|
|
EFT/Burst |
IEC 61000-4-4 |
|
|
Surge |
IEC 61000-4-5 |
|
|
Conducted |
IEC 61000-4-6 |
|
|
Power frequency magnetic field |
IEC 61000-4-8 |
|
|
Voltage dips and interruptions |
IEC 61000-4-11 |
|
|
Harmonics |
EN 61000-3-2, IEC 61000-3-2 |
|
|
Flicker |
EN 61000-3-3, IEC 61000-3-3 |
|
|
Management |
IMC – Intelligent Management Center; command-line interface; Web browser; configuration menu; Out-of-band management (serial RS-232C or MicroUSB); IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB |
|
|
Notes |
IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af apply to PoE+ models only. When using SFPs with this product, SFPs with revision ‘B’ or later (product number ends with the letter ‘B’ or later, e.g., J4858B, J4859C) are required. |
|
– Hàng chính hãng HP.
– Bảo hành: 03 năm
Sản phẩm tương tự
-
HP AP-AC-12V30A 12V/30W Power Adapter JX989A
852.000 ₫HP AP-AC-12V30A 12V/30W Power Adapter JX989A – Product type: AC/DC Adapter. – Device supported: Wireless Access Point. – Output voltage: 12 VDC. – Output power: 30W. – Desktop type. – Compatibility: Aruba Access Points. – Dimension: 7 x 16 x 7 cm. – Weight: 318g. – Hàng chính hãng HP. – Bảo hành: 12 tháng.
-
Aruba Instant On 802.3af POE Midspan R8W31A
Aruba Instant On 802.3af POE Midspan R8W31A – Delivers Class 3 PoE power over Ethernet cabling. Complies with IEEE 802.3af Power over Ethernet standard supplying up to 15.4W out of the injector. – Ethernet cable goes from non PoE switch into the Injector. A separate Ethernet cable goes with PoE from Injector to broader network. Typically Injector is placed next to the switch. Power is delivered to the Injector […]
-
HP Aruba Mobility Controller JW735A
241.200.000 ₫HP Aruba Mobility Controller JW735A – Aruba 7205 (RW) 2-port 10GBASE-X (SFP+) Controller (Supports up to 256 APs and 8K Client). – Support for new 802.11ax (Wi-Fi 6), WPA3 and Enhanced Open – and existing standards. – Patented ClientMatch technology can now group together 802.11ax-capable devices. – Application awareness for 2,600+ applications with no additional hardware. – Built in AI-powered wireless/RF optimization. – Unifies policy enforcement for WLAN, LAN […]
-
Aruba Instant On 30W 802.3at PoE Midspan Injector R9M77A
Aruba Instant On 30W 802.3at PoE Midspan Injector R9M77A – 30W 802.3at PoE midspan injector for use in select Aruba products. – Weight: 172.4gm. – Dimensions: 6.1 x 8.9 x 5.1 cm. – Bảo hành: 12 tháng.
-
HP AP-AC-12V30B 12V/30W Power Adapter JX990A
840.000 ₫HP AP-AC-12V30B 12V/30W Power Adapter JX990A – Product type: AC/DC Adapter. – Device supported: Wireless Access Point. – Output voltage: 12 VDC. – Output power: 30W. – Desktop type. – Compatibility: Aruba Access Points. – Hàng chính hãng HP. – Bảo hành: 12 tháng.
-
HP PD-3501G-AC PoE Injector JW627A
1.812.000 ₫HP PD-3501G-AC PoE Injector JW627A – HP JW627A is a Single-port Power Injector. It enables efficient connection of IEEE 802.3af compliant devices to non-PoE LAN switch ports. – This external PoE injector powers your PoE-supported devices on local networks. Its RJ-45 Gigabit LAN port allows easy and convenient connection. – Power Capacity: 15.4W. – Power Input Voltage: 90-264 V AC. – MTBF: 100,000 hours. – Frequency: 47 – 63 […]
-
HP Aruba 1G SFP LC SX Transceiver J4858D
4.236.000 ₫HP Aruba 1G SFP LC SX Transceiver J4858D – Approved J4858D – 1000Base SX LC, 550 meters, 850 nm SFP transceiver. 100% HP compatible. – Form Factor: SFP – Port Interface: 1 x 1.25GBase LC – Interface Details: 1000Base SX – Data Rate: 1.25 Gbps – Wavelength: 850 nm – Distance: 550 meters – Temperature Range: 0°C to 70°C – Digital Diagnostics (DDM): No – Connection: Multi-mode Fiber (MMF) […]
-
HP 3xx AP Universal Power Supply JL017A
1.020.000 ₫HP 3xx AP Universal Power Supply JL017A – Power supply for use with HP 3xx Cloud-Managed Access Points where PoE is not available. – Dimensions: 9.4 x 3.81 x 3 cm. – Weight: 0.4 kg. – Hàng chính hãng HP. – Bảo hành: 12 tháng.
-
Aruba Instant On 12V/18W Power Adaptor RW R9M79A
Aruba Instant On 12V/18W Power Adaptor RW R9M79A – 12V/18W power adaptor RW for use in select Aruba products. – Weight: 172.4gm. – Dimensions: 6.1 x 8.9 x 5.1 cm. – Bảo hành: 12 tháng.
